Translators - Electronic > iTravl Translators > iTravl GPS

This allows you to navigate to a location, just as you would with any typical GPS unit. But now you don't have to carry yet another device.

1. Open the Navigation System application on your translator.
2. Change the SD cards out, installing the card with the maps that you need (see Maps tab).

To get navigation (directions seem detailed, but it's really quite simple and obvious what to do when using the device):

1. Press ARROW LEFT twice on the left Sidebar on the screen.
2. Press NAVIGATION SYSTEM.
3. Press GPS below twice and make sure number of SATELLITES IN USE is more than 0.
4. Press MENU.
5. Press FIND LOCATION.
6. Press FIND STREET ADDRESS.
7. Input Street address: house number, street name, zip-code. Example: 6660 E Hampden Ave 80224 (no need to input city name and state; make sure you use space appropriately).
8. Select appropriate state in the black box on the right top corner of the screen.
9. Press FIND.
10. You should see the street address on the white background. Tap it.
11. To start navigation, press NAVIGATE TO.

• Eliminate buying and carrying one extra device (a separate GPS).
• Get directions in the language you choose.
• Update and upgrade with an inexpensive SD card, as needed.
• No subscription fees.

You'll enjoy using this unit and to get from one place to another quickly, easily, and in a variety of languages. Input your destination and you'll be on the way. All your traveled routes can be viewed directly in the saved section. The Ectaco GPS records its own position, time, date, speed, heading, and altitude so you never lose your way.

Application note:

• This works only with units purchased in the latter part of 2009. If you bought your translator before September 2009, do not buy this accessory.
• This does not work with any units that have the Statue of Liberty welcome screen, which is the original interface and which is present on multilanguage devices that have more than 9 languages.